![]() Foot Pedal Setup InstructionsSetup instructions for footpedals being used with Express Dictate v5.12 or later and Express Scribe v4.36 or later can be found here: These instructions might work with serial and gameport pedals from other manufacturers but probably will not work with USB pedals from other manufacturers. Also, if you find any other foot pedal controllers that work with Express Scribe or are a foot pedal manufacturer or reseller and would like to add your information to this page, please Contact Us. For details please see Writing a driver for an unsupported controller. Software Suggestions If you have any suggestions for improvements to Express Scribe Transcription Software, or suggestions for other related software that you might need, please post it on our Suggestions page at. Write your Own Pedal DriverIf you are a pedal manufacturer or distributor you can write your own pedal driver. If that does not solve your problem, you can contact us using the technical support contacts listed on that page. Again you will need to be handy with a soldering iron and refer to the wiring information listed on the Foot Pedal Control pages of the Express Scribe Help Screens. The wiring details are listed on the Pedal Wiring Instructions Page.Īlternatively, if you have pedals for old-style microcassette transcription units, the plugs can often be modified for only a couple of dollars. You then need a special cable to connect to your game or serial port. The pedals should cost around $US12 each. ![]() Press Ctrl+J and then paste the time in the box provided for Time (Elapsed) by pressing Ctrl+V followed by the Enter key. Copy the time by highlighting it and pressing Ctrl+C. Seeing and using the software first hand can answer most questions. Express Scribe’s Jump Time feature is useful when you’re editing and want to go back to a specific portion of the audio to re-listen. Back to Express Scribe Transcription Technical Support: Try Express Scribe Transcription Download Express Scribe Transcription free. HOT-KEYS (SHORTCUTS)Express Scribe uses hot-keys for shortcuts within. Be sure to press the 'fn' key when using your hotkeys. Also, with the adjustments, what works for one audio, may not work for another. Here are 8 Express Scribe features you should be using to be more productive. Can I change the location that Express Scribe installs I can't find my previous Express Scribe license details I have updated to Microsoft Vista and Express Scribe will not play my files. The system-wide hot-keys are not working on my Mac. Transcription Tips JExpress Scribe is the most popular transcription software that transcribers use. With a special cable you can use the Radio Shack (Tandy) Pedals (Radio Shack Item 44-610C). General Support Questions Audio is only playing in one ear. This is by far the cheapest option, but you will need to make your own cable/plug. This technology has a number of features including playback speed controls and the ability to start and stop playback with a foot pedal or keyboard commands. Option 3Wire your own or modify an old-style pedal Clear cookies and Temporary Internet files (including off-line content).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |